003 T5:Bk:low *ENG [-210 to 210 / -10 / 10msec/step]
004 T7:Fc:low *ENG [-210 to 210 / -30 / 10msec/step]
2960
[Process Interval]
Adjusts the additional time for ending the machine's process.
001 Additional Time *ENG [0 to 10 / 0 / 1sec/step]
2970
[Cleaning After JOB]
Specifies the threshold sheets for the cleaning of the paper transfer roller with or without
the refresh mode.
001 No Refresh *ENG [0 to 100 / 33 / 1page/step]
002 Refresh *ENG [0 or 1 / 1 / 1/step]
003 - *ENG [0 to 9999 / 0 / 1page/step]
2971 [BW Non-Image:Bias]
001 T1 mono wait:std *ENG [-360 to 80 / -100 / 10msec/step]
003 T1 mono wait:low *ENG [-780 to 210 / -100 / 10msec/step]
2972 [BW Non-Image:Bias]
001 T14:standard speed *ENG
[0 to 4000 / 0 / 10msec/step]
003 T14:low speed *ENG
2973 [Forced Process Down Threshold]
001 - *ENG [0 to 5000 / 0 / 1page/step]
2975 [-]
001 - *ENG [0 to 4000 / 0 / 10/msec/step]
003 *ENG [0 to 4000 / 0 / 10/msec/step]
3. SP Mode Tables
166
To Next Page
Loading...
