101 ANC:Gain *ENG
Sets the of all ANC filters.
[0.00 to 2.00 / 1.00 / 0.01/step]
103 ANC:Rate:LowSpd *ENG
Sets the liner speed correction to the gain of all
ANC filters (Low speed).
[0.00 to 1.00 / 1.00 / 0.01/step]
3463 [TonerSupply :DANC]
101 Int:I:K *ENG
Sets the value for I storge corresponding to the
power off/on.
[-1000.0000 to 1000.0000 / 0.0000 /
0.0001/step]
102 Int:I:C *ENG
Sets the value for I storge corresponding to the
power off/on.
[-1000.0000 to 1000.0000 / 0.0000 /
0.0001/step]
103 Int:I:M *ENG Sets the value for I storge corresponding to the
power off/on.
[-1000.0000 to 1000.0000 / 0.0000 /
0.0001/step]
104 Int:I:Y *ENG
111 ANC:ref Sum:K *ENG
Sets the value for ANC storge corresponding to
the power off/on.
[-1000.0000 to 1000.0000 / 0.0000 /
0.0001/step]
112 ANC:ref Sum:C *ENG
113 ANC:ref Sum:M *ENG
114 ANC:ref Sum:Y *ENG
201 ImgArea:K *ENG
Displays the image area of the latest page.
[0.00 to 999.00 / - / 0.01cm2/step]
202 ImgArea:C *ENG
203 ImgArea:M *ENG
204 ImgArea:Y *ENG
3500 [ImgQltyAdj :ON/OFF]
Main SP Tables-3
199
To Next Page
Loading...
