001 ALL *ENG Sets to off for the execution determination of all
image processing adjustments, potential
controls, MUSIC condition adjustments, or TD
sensor initial settings.
[0 or 1 / 1 / 1/step]
0:OFF, 1:ON
002 ProCon *ENG
003 MUSIC *ENG
004 Init TD Sensor *ENG
3501 [Toner End Prohibition Setting]
001 Process Control *ENG
[0 or 1 / 1 / 1/step]
0:Permit, 1:Forbid
002 MUSIC *ENG
003 TC Adj. *ENG
3510 [ImgQltyAdj :ExeFlag]
001 Toner Recovery: K *ENG
Sets the execution flag for toner recovery.
[0 or 1 / 0 / 1/step]
002 Toner Recovery: C *ENG
003 Toner Recovery: M *ENG
004 Toner Recovery: Y *ENG
011 Init TD Sensor :K *ENG
Sets the execution flag for TD sensor initial
settings.
[0 or 1 / 0 / 1/step]
012 Init TD Sensor :C *ENG
013 Init TD Sensor :M *ENG
014 Init TD Sensor :Y *ENG
021 Process Control *ENG
Sets the execution flag for process control.
[0 to 2 / 0 / 1/step]
022 Developer Agitating *ENG
Sets the execution flag for developer agitating.
[0 or 1 / 0 / 1/step]
023 Blade Damage Prevention *ENG
Sets the execution flag for blade damage
prevention mode.
[0 or 1 / 0 / 1/step]
3. SP Mode Tables
200
To Next Page
Loading...
