008 Force Supply Threshhold *ENG
Sets the forced supply threshold for toner
density adjustment process control.
[0.00 to 1.00 / 0.50 / 0.01mg/cm2/-kV/
step]
009 Supply(Upp Limit) *ENG Sets the upper or lower limit of supply quantity
for toner density adjustment process control.
[0.1 to 25.5 / 1.0 / 0.1g/step]
010 Supply(Lwr Limit) *ENG
021 Pattern Duty:K *ENG
Sets LD Duty of consumption pattern for toner
density adjustment process control.
[0 to 15 / 15 / 1/step]
022 Pattern Duty:C *ENG
023 Pattern Duty:M *ENG
024 Pattern Duty:Y *ENG
031 Max Counts:PowerON *ENG Sets the upper limit of number of consumptions
for toner density adjustment process control.
[0 to 50 / 0 / 1/step]
034 Max Counts:Jobend *ENG
035 Max Counts:ACC *ENG
[0 to 50 / 3 / 1/step]
036 Max Counts:Initialized *ENG
051 Supply Gain(K) *ENG
Sets the supply gain for toner density
adjustment process control.
[0.0 to 1.0 / 0.5 / 0.1/step]
052 Supply Gain(C) *ENG
053 Supply Gain(M) *ENG
054 Supply Gain(Y) *ENG
061 Consump Gain(K) *ENG
Sets the consumption gain for toner density
adjustment process control.
[0.0 to 1.0 / 0.5 / 0.1/step]
062 Consump Gain(C) *ENG
063 Consump Gain(M) *ENG
064 Consump Gain(Y) *ENG
3627 [P Pattern Extraction :Set]
3. SP Mode Tables
216
To Next Page
Loading...
