002 Lamp ON ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
4014
[Scan]
Execute the scanner free fun with each mode.
001 HP Detection Enable ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
002 HP Detection Disable ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
003 ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
004 ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
005 ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
4016
[DF Scan]
001 ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
002 ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
003 ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
004 ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
005 ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
006 ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
007 ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
008 ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
009 ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
010 ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
4020 [Dust Check]
001 Detection ON/OFF:face *ENG
Turns the ARDF scan glass dust check on/ off.
[0 or 1 / 0 / 1step]
0: OFF, 1: ON
3. SP Mode Tables
238
To Next Page
Loading...
Need help?
General
