What to do if Ricoh AFICIO MP C305SP All in One Printer displays 'Authentication has failed'?
If your Ricoh All in One Printer displays "Authentication has failed.", it means the entered Login User Name or Login Password is not correct. For details about the correct Login User Name and Login Password, see Security Guide .
What does 'Shutting down... Please wait' mean on Ricoh AFICIO MP C305SP?
If your Ricoh All in One Printer shows "Shutting down... Please wait", it means the shutdown procedure started because the main power switch was turned off while the machine was in standby or operation. Follow the message and wait for the machine to shut down completely. Do not turn the main power switch on while this message is displayed. If you've already turned it on, follow the message that appears.
What does 'Turn main Power Switch off' mean on Ricoh AFICIO MP C305SP All in One Printer?
If your Ricoh All in One Printer shows "Turn main Power Switch off", it means the machine didn't shut down normally when the main power switch was turned off and immediately turned back on. Turn off the main power switch, wait at least ten seconds after the machine shuts down, and then turn it on again.
What to do if Ricoh All in One Printer can't connect to network?
If your Ricoh All in One Printer is unable to connect to the network, it may be due to a network error. Check the message displayed by pressing [Check] in the function where the error occurred and take the appropriate action. Also, ensure the machine is correctly connected to the network and properly set up. Contact your administrator for network connection details. If the indicator remains lit after troubleshooting, contact your service representative.
Why can't I print in duplex mode on my Ricoh AFICIO MP C305SP All in One Printer?
If you cannot print in duplex mode on your Ricoh All in One Printer, it may be because you have selected a paper tray that is not set for duplex printing, or duplex printing cannot be done with paper set in the bypass tray. Change the setting for "Apply 2-sided" in [System Settings] to enable duplex printing for the paper tray. When using duplex printing, make settings to use paper from a tray other than the bypass tray.
Why is the error message still on after removing the jammed paper on Ricoh AFICIO MP C305SP?
If an error message remains on your Ricoh All in One Printer even after removing misfed paper, it could be because the cover needs to be opened and closed, or paper is still jammed in the tray. Remove any remaining misfed paper, and then open and close the cover.
What to do if Ricoh AFICIO MP C305SP shows an error?
An error on your Ricoh All in One Printer may be due to a defective function with the status "Error Occurred" in the [Check Status] screen. Press [Check] in the function where the error occurred, then check the displayed message, and take appropriate action. You can use other functions normally.
Why is my Ricoh AFICIO MP C305SP printing on the wrong side?
If original images are printing on the reverse side of the paper when using your Ricoh All in One Printer, you may have loaded the paper incorrectly. Load paper into the paper tray with the print side up, or load paper into the bypass tray with the print side down.
Why does Ricoh All in One Printer misfeed so much?
If you're experiencing frequent misfeeds on your Ricoh All in One Printer, the tray's side or end fences may not be set properly, or the copy paper size setting might be incorrect. Remove the misfed paper. Check that the side or end fences are correctly set and locked. Set the proper paper size.
General| Brand | Ricoh |
|---|---|
| Model | AFICIO MP C305SP |
| Category | All in One Printer |
| Language | English |
To Next Page
