Ricoh CL4000DN Quick Installation Guide

Input Paper Sizes Paper Feed Unit (Tray 2/3)
Metric version / Inch version
A4 , B5 JIS , A5 , 8
1
/
2
× 14(Legal) , 8
1
/
2
× 11(Letter) , 5
1
/
2
× 8
1
/
2
The following sizes are supported but not indicated on the tray dial. You should set the tray dial to
" ", and select the paper size with the control panel.
Metric version / Inch version
7
1
/
4
× 10
1
/
2
(Executive) , 8
1
/
4
× 13(Folio) , 8
1
/
2
× 13(Foolscap) , 8 × 13(F/GL) , 7.68 ×
10
1
/
2
(16K)
Tray 2/3 supports custom size paper, approximately 139.7 - 216 mm (5.5 - 8.5 inches) in width,
and 160 - 356 mm (6.3 - 14.01 inches) in length.
Input Paper Sizes Bypass Tray
The following paper size is supported but the paper size should be set with the control panel.
There is no dial on the tray.
Metric version / Inch version
A4 , B5 JIS , A5 , A6 , 8
1
/
2
× 14(Legal) , 8
1
/
2
× 11(Letter) , 5
1
/
2
× 8
1
/
2
, 7
1
/
4
×
10
1
/
2
(Executive) , 8
1
/
4
× 13(Folio) , 8
1
/
2
× 13(Foolscap) , 8 × 13(F/GL) , Com#10 Env
, C5 Env , C6 Env , DL Env , Monarch Env , 7.68 × 10
1
/
2
(16K)
Bypass Tray supports custom size paper, approximately 64 - 216 mm (2.52 - 8.5 inches) in width,
and 139.7 - 432 mm (5.5 - 17 inches) in length. Set as custom size using the printer driver.
The supported size may differ depending on the printer language you use.
See p.96 "Loading Paper".
Input Paper Sizes Envelope Feeder Unit
The following paper size is supported but the paper size should be set with the control panel.
There is no dial on the tray.
Metric version / Inch version
Com#10 Env , C5 Env , C6 Env , DL Env , Monarch Env .
See p.96 "Loading Paper".
5. Paper and Other Media
86
5

Ricoh CL4000DN Specifications

General

Brand	Ricoh
Model	CL4000DN
Category	Printer
Language	English