4. Making Printer Settings Using the
Control Panel
This chapter explains the menu displayed on the control panel and how to change the printer's settings.
Menu Chart
This section explains how to change the default settings of the printer and provides information about the
parameters included in each menu.
Mem. Erase Info
Displays data information inside the memory.
This menu can be selected only when the optional Data overwrite security unit is installed.
Sample Print
Menu
Print One File
Print All Files
Delete One File
Del. All Files
Error File(s)
• This menu appears only if the optional hard disk is installed.
• The most recent 30 errors are stored in the [Error File(s)]. If a new error is added when there are
30 errors already stored, the oldest error is deleted. However, if the oldest error belongs to one
of the following print jobs, it is not deleted. The error is stored separately until the number of those
errors reaches 30. You can check any of these print jobs for error log information.
• Sample Print
• Locked Print
• Hold Print
• Stored Print
• If the main power switch is turned off, the log is deleted.
Locked Print
Same as the [Sample Print] menu.
125
To Next Page
Loading...
Need help?
General
