1. Guide to the Printer
This chapter explains the names and functions of the printer's components.
Exterior: Front View
This section explains names and functions of the parts on the front and right side of the printer.
1. Paper Size Dial
Adjust this dial according to the size and feed direction of the paper loaded in the paper tray.
2. Bypass Tray Extension
Pull this out when loading a sheet that is longer than B5 on the Bypass Tray.
3. Bypass Tray
Use this tray to feed in thick paper, OHP transparencies, adhesive labels, envelopes, and sheets of non-standard
length. When printing on custom paper size, printer driver settings are required.
Up to 100 sheets of plain paper (80 g/m
2
, 20 lb.) can be loaded on the Bypass Tray.
See p.85 "Supported Paper for Each Tray" and p.96 "Loading Paper".
13
To Next Page
Loading...
Need help?
General
