8021x
Use "8021x" commands to display IEEE 802.1x related information.
View settings
msh> 8021x
Configuration
msh> 8021x "parameter"
Parameter Value configured
eap {tls|ttls|leap|peap} {chap|mschap|
mschapv2|pap|md5|tls}
You can specify the EAP authentication type.
tls: EAP-TLS (default)
ttls: EAP-TTLS
leap: LEAP
peap: PEAP
chap, mschap, mschapv2, pap, md5, or tls are
settings for the phase 2 method, and must be set
when using EAP-TTLS or PEAP.
Do not make these settings when using other EAP
authentication types.
If you select EAP-TTLS, you can select chap,
mschap, mschapv2, pap, or md5.
If you select PEAP, you can select mschapv2 or
tls.
username "character string" You can specify the login user name for the
Radius server.
Usable characters: ASCII 0x20-0x7e (31
bytes).
The default is blank.
username2 "character string" You can specify the phase 2 username for EAP-
TTLS/PEAP phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31
bytes).
The default is blank.
domain "character string" You can specify the login domain name for the
Radius server.
Remote Maintenance by telnet
219
To Next Page
Loading...
Need help?
General
