Setting Security Method of Wireless LAN
Setting a WEP key
If the wireless network uses WEP to encrypt transmitted data, the corresponding WEP key must be set to
the printer to allow communications with other network devices.
Ask the network administrator for the WEP key to use.
• When activating the WEP Setting, you must enter the WEP key.
1. Press the [Menu] key.
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Host Interface], and then press the [ Enter] key.
3. Press the [ ] or [ ] key to display [Wireless LAN], and then press the [ Enter] key.
4. Press the [ ] or [ ] key to display [Security Method], and then press the [ Enter] key.
Setting Security Method of Wireless LAN
75
To Next Page
Loading...
Need help?
General
