By pressing the [ ] or [ ] key, the value increases or decreases by 0.1 mm (0.01 inch).
By pressing and holding the [ ] or [ ] key, the value varies by 1 mm (0.1 inch).
The screen for entering the length appears.
7. Press the [ ] or [ ] key to set the vertical value, and then press the [ Enter] key.
After about two seconds, the display returns to the menu.
8. Press the [Menu] key.
The initial screen appears.
Specifying a paper type for Tray 1 and the optional paper feed unit
Improve printer performance by selecting the optimum paper type for the tray. You can select from the
following paper types:
• Plain Paper, Recycled Paper, Special Paper, Color Paper, Letterhead, Preprinted, Thick Paper
You can select custom paper type settings made using Web Image Monitor.
• Be sure to set a paper type using the control panel of the printer as the following procedure. If you
set a paper type only by the printer driver, printing result might not be appropriate.
5. Paper and Other Media
104
To Next Page
Loading...
Need help?
General
