• Enter the correct password.
Irregular Toner
Irregular toner is set.
• Replace the toner to appropriate one.
Load Correct Size Paper/Paper Size: Paper Type: Press # to continue/Paper Size: Paper Type:
The paper size setting on the tray differs from that of actual paper size in the tray.
• Change the paper size of the tray where the error has occurred using dial or press the [Form Feed]
key. Printing will start again after pressing the [ Enter] key.
• See p.96 "Loading Paper".
Load Paper:Tray# or Form Feed
No paper remaining in the indicated tray.
• Load the indicated tray with the paper or select another tray using the [Form Feed] key, or cancel the
job.
Menu Protected Cannot change
The control panel has been digitally locked, and settings cannot be changed.
• This alert message is displayed for 3 seconds before returning to the previous display screen.
No Files exist
There are no files available for deleting or printing.
• Check the error list to identify the files unavailable for printing.
P=XX I=XXXXXXXX Power Off On/Call Service if error reoccurs
Controller error. The SC number indicates the problem.
• Turn the power off, and then on. If the message appears again, contact your sales or service
representative. Report the error code that appears.
Proxy User Name/Password error
Proxy user name and password are incorrect.
• Change the current user name and password to the correct user name and password.
Remove Misfeed Duplex Unit/Open Duplex Unit Cover
Paper is jammed in the duplex unit.
• Remove and re-install the duplex unit. Remove any jammed paper from the duplex unit and under the
rear cover.
• See p.199 "When "Remove Misfeed Duplex Unit" Appears"
9. Troubleshooting
164
To Next Page
Loading...
Need help?
General
