1. The pattern and text you have set is printed.
2. The document is copied or stored in copiers / multifunction machines which the optional Copy
Data Security unit is installed.
3. The document is blanked by vertical stripes overprint.
• When printing a document that is set with [Data security for copying], the printer does not require the
optional Copy Data Security unit to be installed. The Copy Data Security unit is required when copying
or storing a document protected by vertical stripes overprint.
• Only the RPCS printer driver is supported.
• Printing at 200 200 dpi is not possible.
• You cannot partially embed a pattern and text in a document.
• To make the embedded pattern clear, set the character size at least 50 pt (preferably 70 to 80 pt)
and character angle to between 30 and 40 degrees.
• Use 182 257 mm (7
1
/
4
10
1
/
2
inches) or larger paper.
• Use ordinary or recycled paper of at least 70% whiteness.
• Duplex printing may interfere with this function as a result of text and patterns being visible through
the paper.
• For details about setting [Data security for copying], see the printer driver Help.
2. Printing Documents
84
To Next Page
Loading...
Need help?
General
