5. Execute a command to print.
Make sure to set more than two copies.
The Hold Print job is sent to the printer.
Printing a selected Hold Print file only
1. Press the [Menu] key.
The [Menu] screen appears.
2. Press the [ ] or [ ] to display key [Hold Print], and then press the [ Enter] key.
3. Press the [ ] or [ ] to display key [Print One File], and then press the [ Enter] key.
The file name and the time when the job was stored appear.
4. Press the [ ] or [ ] key to display the file you want to print, and then press the [ Enter]
key.
To cancel printing, press the [Escape] key.
5. Press the [ Enter] key.
6. Press [Escape] key 1-4 times.
Printing from the Print Job Screen
111
To Next Page
Loading...
Need help?
General
