Curl Prevention
You can control the fuser temperature to prevent paper from curling.
• On
• Off
• Default: Off
• Use this mode only when paper misfeed occurs frequently during duplex printing.
Del. All Temp
This appears on the menu only when the hard disk is installed.
Use this function to delete all temporarily saved documents (Sample Print, Locked Print and Hold Print
data) at once.
Del. All Stored
This appears on the menu only when the hard disk is installed.
Use this function to delete all saved documents (Stored Print data) at once.
HD Format
Appears when the hard disk is installed.
Reset IPDS Fonts
Use this page to delete all IPDS captured fonts.
• This menu appears only when the optional IPDS unit is installed.
Date/Time
Use this to set the date and time.
WL.LAN Signal
You can check the signal strength when using LAN.
The menu appears when the Wireless LAN interface unit is installed.
WL.LAN Defaults
Reset the wireless LAN to default.
The menu appears when the Wireless LAN interface unit is installed.
Panel Key Sound
You can select whether or not to sound the beeper when the control panel is pressed.
• On
• Off
Maintenance Menu
147
To Next Page
Loading...
Need help?
General
