Messages Description
Error: Rem. Certificate Renewal An error has occurred in the remote certificate
renewal.
Error: USB Board An error has occurred in the USB board.
Error: USB Interface An error has occurred in the USB interface.
Error: Wireless Board An error has occurred in the wireless LAN board.
Full: Log Data Capacity Log data capacity is full.
Full: Waste Toner Bottle Waste toner is full.
Hex Dump Mode It is a hex dump mode.
Independent-supplier Toner Toner that is not recommended is set.
In Use: Input Tray The input tray is being used by other functions.
Jobs Suspended All jobs are suspended.
Loading Toner... Toner is being supplied.
Log Data Transfer failed Log transfer has failed.
Low: Black Toner The black toner cartridge is not set correctly, or
toner is almost running out.
Low: Toner The black toner cartridge is not set correctly, or
toner is almost running out.
Malfunction: Duplex Unit There is a problem with duplex unit.
Malfunction:Lower Paper Tray(s) There is a problem with the Lower Paper Tray.
Malfunction: Output Tray There is a problem with output tray.
Memory Low: Data Storage Memory shortage has occurred while the
document was being accumulated.
Miscellaneous Error Other error has occurred.
Mismatch: Paper Size Indicated paper tray does not contain paper of
selected size.
Mismatch: Paper Size and Type Indicated paper tray does not contain paper of
selected size and type.
5. Monitoring and Configuring the Printer
260
To Next Page
Loading...
Need help?
General
