• Encryption key manual settings, default setting values
• Encryption key auto exchange settings, IKE setting 1-4 values
• Encryption key auto exchange settings, IKE default setting values
Display current settings portions
msh> ipsec -p
• Displays IPsec settings information in portions.
ipsec manual mode
To display or specify encryption key manual settings, use the "ipsec manual_mode" command.
Display current settings
msh> ipsec manual_mode
• Displays the current encryption key manual settings.
Specify encryption key manual settings
msh> ipsec manual_mode {on|off}
• To enable encryption key manual settings, set to [on]. To disable settings, set to [off].
ipsec exclude
To display or specify protocols excluded by IPsec, use the "ipsec exclude" command.
Display current settings
msh> ipsec exclude
• Displays the protocols currently excluded from IPsec transmission.
Specify protocols to exclude
msh> ipsec exclude {https|dns|dhcp|wins|all} {on|off}
• Specify the protocol, and then enter [on] to exclude it, or [off] to include it for IPsec transmission.
Entering [all] specifies all protocols collectively.
ipsec manual
To display or specify the encryption key manual settings, use the "ipsec manual" command.
Display current settings
msh> ipsec manual {1|2|3|4|default}
• To display the settings 1-4, specify the number [1-4].
• To display the default setting, specify [default].
• Not specifying any value displays all of the settings.
8. Security Measures Provided by this Printer
366
To Next Page
Loading...
Need help?
General
