2. Enter the following command in the MS-DOS command prompt:
CHANGE USER /INSTALL
To quit the install mode, enter the following command in the MS-DOS command prompt:
CHANGE USER /EXECUTE
• For more information, see Windows Help.
MetaFrame's [Auto-creating client printers]
Using [Auto-creating client printers], you can select a logical printer created by copying the client's
local printer data to the MetaFrame server. We strongly recommend testing this function in your
network environment before using it for your work.
• The settings for optional equipment will not be stored in the server after the equipment is
disconnected. The settings for optional equipment will be restored to its defaults each time the
client computer logs on to the server.
• When printing a large number of bitmap images or using the server in a WAN environment over
dial-up lines such as ISDN, printing may not be possible or errors may occur, depending on
data transfer rates.
MetaFrame's [Printer driver replication]
Using [Printer driver replication], you can distribute printer drivers across all servers in a server farm.
We strongly recommend testing this function in your network environment before using it for your
work.
• If the printer drivers are not properly copied, install them directly onto each server.
9. Appendix
384
To Next Page
Loading...
Need help?
General
