The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Host Interface], and then press the [ Enter] key.
3. Press the [ ] or [ ] key to display [Network Setup], and then press the [ Enter] key.
4. Press the [ ] or [ ] key to display [Ethernet Speed], and then press the [ Enter] key.
5. Press the [ ] or [ ] key to select the Ethernet speed, and then press the [ Enter] key.
6. Press the [Menu] key.
The initial screen appears.
7. Print a configuration page to confirm the settings made.
• If Ethernet and wireless LAN are both connected, select which interface you want to use under [LAN
Type].
• For details about printing the configuration page, see "Printing the Test Page", Quick Installation
Guide.
4. Configuration
68
To Next Page
Loading...
Need help?
General
