Ricoh LI-MF1 M126 - Download Emuls; Factory Defaults

Value of PPDS
Emulation setting
Resulting value of
SmartSwitch setting (all
ports)
Resulting value for Printer Language settings
Activate Off
PPDS Emulation
• You can still switch languages on the
operator panel or through the PJL ENTER
LANGUAGE command.
Deactivate On Machine’s factory default value
To change the value of this setting:
1.
Touch "PPDS Emulation" from the Configuration Menu.
[setting's current value] appears on the
touch-screen.
2.
Touch
or to scroll through the setting's possible values.
3.
Touch "Back" to cancel and return to the Configuration Menu.
4.
Touch "Submit" to save the change.
Download Emuls
This setting enables you to disable a Downloadable emulator (DLE) that is installed on the machine. The
setting for this menu setting is disabled.
• The DLE is re-enabled automatically after two PORs.
To change the value of this setting:
1.
Touch Download Emuls from the Configuration Menu.
[setting's current value] appears on the
touch-screen.
2.
Touch
or to scroll through the setting's possible values.
3.
Touch "Back" to cancel and return to the Configuration Menu.
4.
Touch "Submit" to save the change.
Factory Defaults
• This operation cannot be undone.
Configuration Menu (CONFIG MENU)
147
5