2. Touch or to scroll through the setting's other possible values. The settings are Enable, Disable,
ADF disable.
3. To save the setting's new value, touch "Submit".
Paper Prompts
When a tray is out of the indicated paper size, a prompt is sent to the user to load paper in a tray. This
setting controls the tray the user is directed to fill. Selections are Auto (default), MP Feeder, and Manual
Paper.
To change this setting:
1. Touch "Paper Prompts" from the Configuration Menu. [setting's current value] appears on the
touch-screen.
2. Touch or to scroll through the setting's other possible values.
3. To exit this screen without changing the setting's value, touch "Back".
4. To save the setting's new value, touch "Submit".
Envelope Prompts
This setting controls the tray the user is directed to refill when a specific envelope size is out. The
selections are Auto (default), MP Feeder, and Manual Env.
To change the value of this setting:
1. Touch "Env Prompts" from the Configuration Menu. [setting's current value] appears on the
touch-screen.
2. Touch or to scroll through the setting's possible values.
3. To exit this screen without changing the setting's value, touch "Back".
4. To save the setting's new value, touch "Submit".
Action For Prompts
This setting determines which input source receives paper-related or envelope-related change prompts
when they occur.
To change the value of this setting:
1. Touch "Action for Prompts" from the Configuration Menu. [setting's current value] appears on
the touch-screen.
2. Touch or to change the setting’s value. The values are Prompt user, Continue, and Use
current.
5. System Maintenance
152
To Next Page
Loading...
