Removal Procedures
• Remove the photoconductor unit, toner cartridge and media tray before removing other parts. The
photoconductor unit and toner cartridge should be protected from light while out of the printer.
• We recommend disconnecting all external cables from the printer to prevent damage during
service.
•
Unless otherwise stated, reinstall the parts in reverse order of removal.
• When reinstalling a part held with several screws, start all screws before final tightening.
ACM Pick Tire Roller Removal
1. Place the printer on its side.
• Be careful to not mar the finish of the printer.
4. Replacement and Adjustment
40
To Next Page
Loading...
