Messages and Error Codes
User Attendance Messages
The machine control panel displays messages describing the current state of the machine and indicates
possible machine problems that must be resolved. This topic provides a list of all machine messages,
explains what they mean, and tells how to clear the messages.
The following table lists the messages in alphanumerical order. A message can also be located using the
index.
User status and attendance messages
User primary message Explanation
Change <src><Custom type
name>
This IR allows a user to override the source for the remainder of a
job. The page will be printed as it is formatted on the paper installed
in the tray. This may cause clipping. No further Change prompts will
be posted for the remainder of the current job.
The following actions can be taken:
• Change the paper source to a custom type / custom string /
source and size/ source, type, size.
• Continue the print job.
•
Request more information.
• Use the current source.
• Reset the active.
• Wait fir supplies.
Change <src><Custom
String>
Change <src><size>
Change <src><type><size>
Close Door Message clears when front door is closed.
Disk Corrupted. Reformat?
This message appears if there is a corrupted hard disk. Reformat the
drive. If the message remains, replace the disk.
Weblink server not setup.
Contact system administrator
Web Link is being used for e-mail, and either the 'Server' or 'Web
Link' fields are NULL in the Web Link Setup.
• The system administrator needs to configure the server.
SMTP server not setup.
Contact system administrator
The devices primary and secondary SMTP fields are blank. This
needs to be configured by the system administrator.
Messages and Error Codes
197
To Next Page
Loading...
