Wear Strip (550-Sheet Tray 2) Removal
1. Use a spring hook to disconnect the strip from the top of the tray.
2. Lift out the strip.
• When replacing the strip (for all trays):
• Carefully insert the strip from the top of the tray, and push it down through the opening until it
snaps into place.
• Turn the tray over to view the bottom of the strip. Using the spring hook, check to make sure
that the end of the strip is fastened tightly.
•
Be sure that the drafted edge of the strip is installed toward the bottom of the tray.
4. Replacement and Adjustment
110
To Next Page
Loading...
