Event log
The event log provides a history of errors. The event log can only be printed in the Configuration menu.
Additional options are available in the Diagnostics menu. See “Reports” in “System Maintenance”.
To print the event log:
1. Select "Print Event Log" from the Event Log menu.
2. Press to return to the Configuration menu.
• An event log printed from the CONFIG MENU will not contain debug information or
secondary codes for 900 service errors. However, the event log printed from DIAGNOSTICS
mode does include this information.
Panel Menus
Lets the system support person enable or disable the operator panel menus. Selecting "On" (the default)
allows users to change values for the machine. "Off" disables the users’ access to menus. If a user
presses "Menu" ( ), they receive a message that the panel menus are locked. When set to "Off", this
setting restricts all menu access, even to menus or items set for PIN access. However, when set to "On",
all PIN restrictions are restored.
To change the value of this setting:
1. Touch "Panel Menus" from the Configuration Menu. [setting's current value] appears on the
touch-screen.
2. Touch or to scroll through the setting's other possible values.
3. Touch "Back" to cancel and return to the Configuration Menu.
4. Touch "Submit" to save the change.
PPDS Emulation
The value of the PPDS Emulation menu item determines if a device can recognize and use the PPDS
datastream. The current value of this setting appears in parentheses to the right of the setting on the
Configuration Menu screen.
The following table indicates how the value of this setting affects the user default value for the
SmartSwitch and Printer Language settings:
5. System Maintenance
146
To Next Page
Loading...
