Installation note:
• Install the two screws holding the new solenoid in place, and route the cable (D) behind the MPF
clutch (E).
• After disconnecting the old solenoid cable, connect the new solenoid cable to J25 on the engine
board.
Media ACM ASM Feeder Removal
1. Left side cover ( p.66 "Left Side Cover Removal")
2. LVPS/HVPS ( p.70 "LVPS/HVPS Removal")
3. Duplex ( p.54 "Duplex Removal")
4. Main motor gear drive ( p.72 "Main Motor Gear Drive Removal")
5. Remove the media feed clutch ( p.81 "Media Feed Clutch with Cable Removal")
4. Replacement and Adjustment
78
To Next Page
Loading...
