System Service Mode
M065/M066 8-2 SM Appendix
014 By-pass:Plain:1200dpi *ENG
[–9 to 9 / 1 / 0.1 mm/step]
015 By-pass: M-Thick:1200dpi *ENG
[–9 to 9 / 0.1 / 0.1 mm/step]
016 By-pass:Thick1:1200dpi *ENG
[–9 to 9 / 0.1 / 0.1 mm/step]
017 Duplex:Plain *ENG
[–9 to 9 / 3.9 / 0.1 mm/step]
018 Duplex:M-Thick *ENG
[–9 to 9 / 0.1 / 0.1 mm/step]
019 Duplex:Thick1 *ENG
[–9 to 9 / -1.6 / 0.1 mm/step]
020 Duplex: Thick2 *ENG
[–9 to 9 / -2.4 / 0.1 mm/step]
021 Duplex:Plain:1200dpi *ENG
[–9 to 9 / 0.8 / 0.1 mm/step]
022 Duplex:MThck:1200dpi *ENG
[–9 to 9 / 0.1 / 0.1 mm/step]
023 Duplex:Thck1:1200dpi *ENG
[–9 to 9 / 0.2 / 0.1 mm/step]
024 Tray:Thin *ENG
[–9 to 9 / 0 / 0.1 mm/step]
026 By-pass:Thin *ENG
[–9 to 9 / 0 / 0.1 mm/step]
1002
[Side-to-Side Registration]
Adjusts the side-to-side registration by changing the laser main scan start
position for each mode and tray.
Increasing a value: an image is moved to the rear edge of paper.
Decreasing a value: an image is moved to the front edge of paper.
001 By-pass *ENG
[–4 to 4 / 0.0 / 0.1 mm/step]
002 Paper Tray 1 *ENG
003 Paper Tray 2 *ENG
004 Paper Tray 3 *ENG
005 Paper Tray 4 *ENG
006 Duplex *ENG
To Next Page
Loading...
