Ricoh M065 - Page 413

System Service Mode
SM Appendix 8-3 M065/M066
Appendix:
SP Mode
Tables
1003
[Paper Buckle] Paper Buckle Adjustment
(Tray Location, Paper Type), Paper Type: N: Normal, TH: Thick
Adjusts the amount of paper buckle at the registration roller by changing the
paper feed timing.
001 Tray1:Plain *ENG
[–20 to 20 / -1 / 1 mm/step]
002 Tray1:M-Thick *ENG
[–20 to 20 / -1 / 1 mm/step]
003 Tray1:Thick1 *ENG
[–20 to 20 / -3 / 1 mm/step]
004 Tray234:Plain *ENG
[–20 to 20 / -1 / 1 mm/step]
005 Tray234:M-Thick *ENG
[–20 to 20 / -1 / 1 mm/step]
006 Tray234:Thick1 *ENG
[–20 to 20 / -3 / 1 mm/step]
007 By-pass:Plain *ENG
[–20 to 20 / -3 / 1 mm/step]
008 By-pass:M-Thick *ENG
[–20 to 20 / -3 / 1 mm/step]
009 By-pass:Thick1 *ENG
[–20 to 20 / -4 / 1 mm/step]
010 Duplex:Plain *ENG
[–20 to 20 / -2 / 1 mm/step]
011 Duplex:M-Thick *ENG
[–20 to 20 / -2 / 1 mm/step]
012 Duplex:Thick1 *ENG
[–20 to 20 / -4 / 1 mm/step]
013 Tray1:Plain:1200dpi *ENG
[–20 to 20 / -1 / 1 mm/step]
014 Tray1:M-Thick:1200dpi *ENG
[–20 to 20 / -1 / 1 mm/step]
015 Tray1:Thick1:1200dpi *ENG
[–20 to 20 / -3 / 1 mm/step]
016 Tray234:Plain:1200dpi *ENG
[–20 to 20 / -1 / 1 mm/step]
017 Tray234:M-Thick:1200dpi *ENG
[–20 to 20 / -1 / 1 mm/step]
018 Tray234:Thick1:1200dpi *ENG
[–20 to 20 / -3 / 1 mm/step]
019 By-pass:Plain:1200dpi *ENG
[–20 to 20 / -3 / 1 mm/step]
020 By-pass:M-Thick:1200dpi *ENG
[–20 to 20 / -3 / 1 mm/step]
021 By-pass:Thick1:1200dpi *ENG
[–20 to 20 / -4 / 1 mm/step]