System Service Mode
M065/M066 8-34 SM Appendix
013 Alone Time *ENG
[0 to 1440 / 360 / 10 min/step]
014 Coefficient of Correction *ENG
[0 to 2 / 1 / 0.01 kV/mA/step]
2015 [Charge AC Adj: Result]
001 Bk *ENG
[0 to 9 / 0 / 1 /step]
002 C *ENG
003 M *ENG
004 Y *ENG
2101
[Color Regist Adust]
These values are the parameters for the automatic line position adjustment
and are adjusted at the factory. However, you must input a value for
SP2101-001 after replacing the laser unit. For details, see "Laser Unit" in the
"Replacement and Adjustment" section. The value should be provided with the
new laser unit.
001 Bk: Main Scan: Dot *ENG
[–511 to 511 / 0 / 1 dot/step]
002 C Main Scan: Dot *ENG
003 M Main Scan: Dot *ENG
004 Y Main Scan: Dot *ENG
005 Bk: Sub Scan: Line *ENG
[–800 to 800 / 0 / 1 line/step]
006 C: Sub Scan: Line *ENG
007 M: Sub Scan: Line *ENG
008 Y: Sub Scan: Line *ENG
To Next Page
Loading...
