System Service Mode
M065/M066 8-68 SM Appendix
2316 [Power ON:Bias] DFU
001
Image Transfer *ENG
[0 to 80 / 5 / 1
A /step]
Adjusts the bias of the image transfer roller at power-on or a closed cover.
2326
[Paper Transfer Roller CL: Bias] DFU
Paper Transfer Roller Cleaning: Bias Adjustment
001
Positive:before and
after JOB
*ENG
[0 to 2100 / 1000 / 10 V /step]
Adjusts the positive voltage of the paper transfer roller for cleaning the paper
transfer roller.
002
Negative:before and
after JOB
*ENG
[10 to 995 / 100 / 10 %/step]
Adjusts the negative current of the paper transfer roller for cleaning the paper
transfer roller.
003
Positive:after JAM *ENG
[0 to 2100 / 2000 / 10 V/step]
Adjusts the negative current limit of the paper transfer roller for cleaning the
paper transfer roller.
004 Negative:after JAM *ENG
[10 to 995 / 100 / 10 %/step]
2351
[Common: BW: Bias]
Image Transfer Belt: B/W: Bias Adjustment
Standard: 260 mm/sec, Middle: 182 mm/sec, Low: 85 mm/sec
001
Image Transfer:Standard Speed *ENG
[0 to 80 / 26 / 1
A]
Adjusts the current for the image transfer belt in B/W mode for plain paper.
002
Image Transfer:Middle Speed *ENG
[0 to 80 / 17 / 1
A]
Adjusts the current for the image transfer belt in B/W mode for M-Thick paper.
003
Image Transfer:Low Speed *ENG
[0 to 80 / 7 / 1
A]
Adjusts the current for the image transfer belt in B/W mode for thick 1 paper.
To Next Page
Loading...
