Ricoh M065 - Page 477

System Service Mode
SM Appendix 8-67 M065/M066
Appendix:
SP Mode
Tables
007
Temperature:Threshold *ENG
[–5 to 30 / 5 / 1 deg/step]
Adjusts the threshold temperature for SLL. If detected temperature is less than
a value specified by this SP, SLL condition is determined regardless of
humidity.
2308
[Paper Size Correction] DFU
Adjusts the threshold value for the paper size correction.
001 Threshold 1 *ENG
[0 to 250 / 194 / 1 mm/step]
Threshold 1 ≤ paper:
Paper is detected as "S1" size.
002 Threshold 2 *ENG
[0 to 250 / 165 / 1 mm/step]
Threshold 2 ≤ paper ≤ Threshold 1:
Paper is detected as "S2" size.
003 Threshold 3 *ENG
[0 to 250 / 139 / 1 mm/step]
Threshold 3 ≤ paper ≤ Threshold 2:
Paper is detected as "S3" size.
2311 [Non Image Area: Bias] DFU
001 Image Transfer *ENG
Adjusts the bias of the image transfer belt
between images. This value is added to the
value of the image transfer belt bias.
[10 to 250 / 100 / 5 %/step]
002 Paper Transfer *ENG
Adjusts the bias of the paper transfer roller
between images.
[0 to 230 / 0 / 1 -
A/step]