Ricoh M065 - Page 481

System Service Mode
SM Appendix 8-71 M065/M066
Appendix:
SP Mode
Tables
012 Image Transfer: Low Spd:Bk *ENG
[1 to 100 / 57 / 1 /step]
013 Image Transfer: Low Spd:C *ENG
[1 to 100 / 58 / 1 /step]
014 Image Transfer: Low Spd:M *ENG
[1 to 100 / 58 / 1 /step]
015 Image Transfer: Low Spd:Y *ENG
[1 to 100 / 58 / 1 /step]
2401
[Plain1: Bias]
Adjusts the DC voltage of the discharge plate for plain 1 paper.
Standard: 260 mm/sec, Low: 85 mm/sec
001 Separation DC: Standard-Spd: 1st *ENG
[0 to 6000 / 2000 / 10 -V/step]
002 Separation DC: Standard-Spd: 2nd *ENG
003 Separation DC: Low-Spd: 1st *ENG
004 Separation DC: Low-Spd: 2nd *ENG
2403
[Plain1: Bias: BW]
Adjusts the current for the paper transfer roller for plain 1 paper in
black-and-white mode.
Normal: 260 mm/sec, Low: 85 mm/sec
001 Paper Transfer: Normal: 1st *ENG
[0 to 230 / 21 / 1 –
A /step]
002 Paper Transfer: Normal: 2nd *ENG
[0 to 230 / 23 / 1 –
A /step]
003 Paper Transfer: Low: 1st *ENG
[0 to 230 / 15 / 1 –
A /step]
004 Paper Transfer: Low: 2nd *ENG