Ricoh M065 - Page 482

System Service Mode
M065/M066 8-72 SM Appendix
2407
[Plain1: Bias: FC]
Adjusts the current for the paper transfer roller for plain 1 paper in full color
mode.
Normal: 260 mm/sec, Low: 85 mm/sec
001 Paper Transfer: Normal: 1st *ENG
[0 to 230 / 38 / 1 –
A /step]
002 Paper Transfer: Normal: 2nd *ENG
[0 to 230 / 40 / 1 –
A /step]
003 Paper Transfer: Low: 1st *ENG
[0 to 230 / 21 / 1 –
A /step]
004 Paper Transfer: Low: 2nd *ENG
[0 to 230 / 18 / 1 –
A /step]
2411
[Plain-T:SizeCorrect:BW] DFU
Adjusts the size correction coefficient for the paper transfer roller current for
each paper size. SP2403 and SP2407 are multiplied by these SP values.
Normal: 260 mm/sec, Low: 85 mm/sec
001 Paper Transfer: Normal: 1st: S1 *ENG
[100 to 995 / 100 / 5%/step]
S1 size ≥ 194 mm (Paper width)
002 Paper Transfer: Normal: 2nd: S1 *ENG
003 Paper Transfer: Low: 1st: S1 *ENG
004 Paper Transfer: Low: 2nd: S1 *ENG
005 Paper Transfer: Normal: 1st: S2 *ENG
[100 to 995 / 135 / 5%/step]
194 mm > S2 size ≥ 165 mm
(Paper width)
006 Paper Transfer: Normal: 2nd: S2 *ENG
[100 to 995 / 200 / 5%/step]
194 mm > S2 size ≥ 165 mm
(Paper width)
007 Paper Transfer: Low: 1st: S2 *ENG
[100 to 995 / 135 / 5%/step]
194 mm > S2 size ≥ 165 mm
(Paper width)
008 Paper Transfer: Low : 2nd:S2 *ENG
[100 to 995 / 200 / 5%/step]
194 mm > S2 size ≥ 165 mm
(Paper width)