Ricoh M065 - Page 570

System Service Mode
M065/M066 8-160 SM Appendix
2830
[SP 2: Env. Correct Table] DFU
Middle: 182 mm/sec, Low: 85 mm/sec
013 Separation DC: Middle: 1st *ENG
[1 to 100 / 30 / 1 /step]
014 Separation DC: Middle: 2nd *ENG
015 Separation DC: Low: 1st *ENG
016 Separation DC: Low: 2nd *ENG
[SP 2: Edge-Env. Correct] DFU
017 Separation DC: Middle: 1st *ENG
[1 to 100 / 30 / 1 /step]
018 Separation DC: Middle: 2nd *ENG
019 Separation DC: Low: 1st *ENG
020 Separation DC: Low: 2nd *ENG
2851
[Special 3: Bias]
Adjusts the DC voltage of the discharge plate for special paper 3.
Low: 85 mm/sec
003 Separation DC: Low Spd: 1st *ENG
[0 to 6000 / 2000 / 10 -V/step]
004 Separation DC: Low Spd: 2nd *ENG
2852
[SP3: Bias: BW]
Adjusts the current for the paper transfer roller for special paper 3 in
black-and-white mode.
Low: 85 mm/sec
003 Paper Transfer: Low: 1st *ENG
[0 to 230 / 9 / 1 –
A /step]
004 Paper Transfer: Low: 2nd *ENG
[0 to 230 / 12 / 1 –
A /step]