Ricoh M065 - Page 569

System Service Mode
SM Appendix 8-159 M065/M066
Appendix:
SP Mode
Tables
006 Separation DC: Middle: 2nd *ENG
007 Separation DC: Low: 1st *ENG
008 Separation DC: Low: 2nd *ENG
2824
[SP 2: SwTiming: T-Edge] DFU
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
plate at the paper trailing edge between the erase margin area and the image
area.
Middle: 182 mm/sec, Low: 85 mm/sec
001 Paper Transfer: Middle: 1st *ENG
[0 to 50 / 0 / 2 mm/step]
002 Paper Transfer: Middle: 2nd *ENG
003 Paper Transfer: Low: 1st *ENG
004 Paper Transfer: Low: 2nd *ENG
005 Separation DC: Middle: 1st *ENG
006 Separation DC: Middle: 2nd *ENG
007 Separation DC: Low: 1st *ENG
008 Separation DC: Low: 2nd *ENG