Ricoh M065 - Page 622

System Service Mode
M065/M066 8-212 SM Appendix
3511
[Execution Interval: Setting]
Adjusts the threshold for each adjustment mode.
001 Job End: Process Control: BW *ENG
[0 to 2000 / 250 / 1 page/step]
002 Job End: Process Control: FC *ENG
[0 to 2000 / 85 / 1 page/step]
003 Interrupt: Process Control: BW *ENG
[0 to 2000 / 500 / 1 page/step]
004 Interrupt: Process Control: FC *ENG
[0 to 2000 / 200 / 1 page/step]
005 Initial: Potential Control: BW *ENG
[0 to 2000 / 250 / 1 page/step]
006 Initial: Potential Control: FC *ENG
[0 to 2000 / 100 / 1 page/step]
007 Vsg Adj. Counter *ENG
[0 to 2000 / 0 / 1 page/step]
008 Charge AC Control Counter *ENG
[0 to 2000 / 500 / 1 page/step]
019 Envir.Correction:ON/OFF *ENG
[0 or 1 / 1 / 1 /step]
0: Not Correct (OFF),
1: Correct (ON)
020 Gamma Correction: ON/OFF *ENG
021 Non-use Time Correct:ON/OFF *ENG
022 Correction Coeff. 1: JE: BW *ENG
[0 to 1 / 0.2 / 0.01 /step]
023 Correction Coeff. 2: JE: BW *ENG
[0 to 1 / 1 / 0.01/step]
024 Correction Coeff. 1: JE: FC *ENG
[0 to 1 / 0.59 / 0.01/step]
025 Correction Coeff. 2: JE: FC *ENG
[0 to 1 / 1 / 0.01/step]
026
Correction Coeff. 1: Interrupt:
BW
*ENG
[0 to 1 / 0.1 / 0.01/step]
027
Correction Coeff. 2: Interrupt:
BW
*ENG
[0 to 1 / 1 / 0.01/step]
028
Correction Coeff. 1: Interrupt:
FC
*ENG
[0 to 1 / 0.25 / 0.01/step]