System Service Mode
M065/M066 8-268 SM Appendix
013 POP3/IMAP4 Auth.
If POP before SMTP is enabled, then
you can use this SP to enable or
disable encryption mode for POP
authentication
[0 to 2 / 0 / 1]
0: Auto
1: Off
2: On
014 POP Serv Port No. Input the POP server port number.
015 IMAP4 Srvr Port Input the IMAP4 server port number.
016 SMTP Rx Port No.
Input the SMTP port for the mail
reception.
017 Mail Rx Interval
Specifies the interval for the mail
reception.
019 Mail Keep Setting
Selects the mail saving setting.
[0 to 2 / 0 / 1]
0: Not saved in the mail server
1: All saved in the mail server
2: Only error mails saved in the mail
server
020 Partial Mail Receive Timeout
[1 to 168 / 72 / – ]
Sets the amount of time to wait before saving a mail that breaks up during
reception. The received mail is discarded if the remaining portion of the mail is
not received during this prescribed time.
021 MDN Response RFC2298 Compliance
[0 to 1 / 1 / – ]
Determines whether RFC2298 compliance is switched on for MDN reply mail.
0: No
1: Yes
To Next Page
Loading...
