Main Machine Installation
D255/D256/M281/M282 2-10 SM
3. For Administrator 1, perform the same procedure as steps 1 and 2.
4. Press [OK].
The home display appears.
5. Turn OFF/ON the main power.
SP5-755-002 hides the administrator password input screen temporarily and continue the
installation procedure without setting an administrator password. However, the Program/Change
Administrator screen will appear every time you turn OFF/ON the main power, if the password is
not set.
Password Setting Procedure
For more details about this security issue, see "Notes on Using Multi-Function Printers
Safely" supplied with the MFP.
When Supervisor / Administrator 1-4 passwords are configured via network, the "Change
Supervisor login password" window will not be displayed.
The passwords for Supervisor or Administrator 1 to 4 can be set via "System Settings".
However, the Program/Change Administrator screen will appear every time the main
power is turned ON if the passwords are set this way. We recommend that customers set
the passwords via network or the Program/Change Administrator screen.
1. Install the MFP.
2. Turn ON the main power.
3. Change the Supervisor login password.
To Next Page
Loading...
