Ricoh M281 Series - Page 383

Firmware Update
SM 5-13 D255/D256/M281/M282
System
Maintenance
Code Contents Solutions
44 The data to be overwritten
cannot be accessed when
controller-related programs
are downloaded.
 Switch the main power supply off and
on to try again.
 Install the correct ROM update data in
the SD card.
 Replace the controller board if the data
to be overwritten is contained on the
controller board.
49 Firmware updates are
currently prohibited.
 The setting of Update Firmware in the
Administrator Tools has been set to
[Prohibit] by an administrator. Amend
the setting to [Do not Prohibit] and try
again.
50 The results of the electronic
authorization check have
rejected the update data.
 Install the correct ROM update data in
the SD card.
57 @Remote is not connected at
the date/time reserved for
receiving the package
firmware update from the
network.
*1
 Check the @Remote connection.
58 Update cannot be done due to
a reception route problem.
*1
 Check the @Remote connection.
59 HDD is not mounted.
*1
 Check the HDD connection.
60 HDD could not be used during
the package firmware update.
*1
 Try again.
 Replace the HDD if the download fails
again.
61 The module ID for the
package firmware update is
incorrect.
*1
 Prepare the correct package files.
62 The configuration of the
package firmware update files
is incorrect.
*1
 Prepare the correct package files.