Ricoh M281 Series - Page 385

Firmware Update
SM 5-15 D255/D256/M281/M282
System
Maintenance
Code Contents Solutions
70 Package firmware download
from the network fails.
*1
 Check that the network is connected
correctly.
71 Network communication error
occurs at the reserved
date/time of the package
firmware update from the
network.
*1
 Check that the network is connected
correctly.
72 The setting of @Remote is
invalid at the reserved
date/time of the package
firmware update from the
network.
*1
 Set the setting of @Remote Service in
the Administrator Tools to [Do not
Prohibit].
*1 The error occurs in MP 501/601 only
 The PDF firmware installed as standard contains a program required to print PS3 data as
default. However, this PS3 program is normally disabled.
 The PS3 firmware is a dongle (key) which enables PS3 data printing functions. When the
PS3 firmware is installed, the PS3 program in the PDF firmware is enabled. Due to this
specification, the self-diagnosis result report shows the ROM part number/software
version of the PDF firmware contained in the PS3 program.