Package Firmware Update (MP 501/601 Only)
SM 5-19 D255/D256/M281/M282
Maintenance
4. Touch [Execute Update].
5. Touch [YES].
6. The following display will be displayed.
If the error code E66, which indicates that the download of the firmware has failed, is
displayed, implement this procedure from step 1.
Update will be started automatically after the download is finished.
When the machine is in the update mode, the automatic update is suspended if a
print job is implemented. After the print job is finished, touch [YES] on the display
shown with the following picture to restart updating.
To Next Page
Loading...
