Package Firmware Update (MP 501/601 Only)
SM 5-25 D255/D256/M281/M282
Maintenance
4. Touch [Execute Update].
5. Check the version of the received package firmware, and then touch [YES].
Update is started.
If the version of the reserved package in the HDD is older than the latest version, the
messages shown in the following picture are displayed.
If you wish to download the latest version, touch [Execute] beside the message
"Download and update the latest package." Then update of the package firmware will
be started.
If you wish to update using the firmware in the HDD (old version), touch [Execute]
beside the message "Update to the received package."
To Next Page
Loading...
