Package Firmware Update (MP 501/601 Only)
D255/D256/M281/M282 5-28 SM
When the SD card contains both a firmware package and one or more modules, the
following display may show up. Select [Package] and touch [OK] to move to step 4
above.
6. Update is started automatically after the package firmware download to the HDD has
been completed.
7. When update is completed, "Update done" is displayed.
The figures at the lower right of the display indicate "Number of updated items/ All
items to be updated".
8. Turn OFF the main power, and then pull out the SD card from the SD Card Slot 2
(lower).
9. Turn ON the main power.
To Next Page
Loading...
