Paper Feed Unit PB1100 (D3C2-01, 02)
D255/D256/M281/M282 2-28 SM
11. Close the rear cover of the optional paper feed unit.
12. Remove the paper feed tray [A] by pulling it out.
13. Install the joint bracket B [A] on the front side with the hexagon flange screw (M4×8).
When you install two or more optional paper feed units, please refer to page 2-29 "When
installing two or more optional paper feed units".
When you install only one optional paper feed unit, please refer to page 2-32.
To Next Page
Loading...
