Main SP Tables-8
SM Appendix 3-105 D255/D256/M281/M282
806x-005 Z-Fold Number of jobs started In any mode other than the
Booklet mode and set for folding (Z-fold).
806x-006 Punch Number of jobs started in Punch mode. When Punch
is set for a print job, the P: counter increments. (See
SP8 064 6.)
806x-007 Other Reserved. Not used.
806x-008 Inside-Fold Not used
806x-009 Three-IN-Fold Not used
806x-010 Three-OUT-Fold Not used
806x-011 Four-Fold Not used
806x-012 KANNON-Fold Not used
806x-013 Perfect-Bind Not used
806x-014 Ring-Bind Not used
806x-015 3rd Vendor
8071 T:Jobs/PGS *CTL [0 to 99999999/ 0 / 1/step]
These SPs count the number of jobs broken down by the number of pages in
the job, regardless of which application was used.
8072 C:Jobs/PGS *CTL [0 to 99999999/ 0 / 1/step]
These SPs count and calculate the number of copy jobs by size based on the
number of pages in the job.
8073 F:Jobs/PGS *CTL [0 to 99999999/ 0 / 1/step]
These SPs count and calculate the number of fax jobs by size based on the
number of pages in the job.
8074 P:Jobs/PGS *CTL [0 to 99999999/ 0 / 1/step]
These SPs count and calculate the number of print jobs by size based on the
number of pages in the job.
8075 S:Jobs/PGS *CTL [0 to 99999999/ 0 / 1/step]
To Next Page
Loading...
