EasyManua.ls Logo

Ricoh M281 Series - Page 778

Ricoh M281 Series
1003 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Main SP Tables-8
D255/D256/M281/M282 3-138 SM Appendix
The B/W and Color counts are done after the document is stored on the HDD of the Scan
Router server.
If the job is canceled before storage on the Scan Router server finishes, the counts are
not done.
The count is executed even if regardless of confirmation of the arrival at the Scan Router
server.
8671 T:Deliv PGS/PC *CTL [0 to 99999999/ 0 / 1/step]
These SPs count by color mode the total number of pages sent to a folder
on a PC (Scan-to-PC) with the Scan and LS applications.
8675 S: Deliv PGS/PC *CTL [0 to 99999999/ 0 / 1/step]
These SPs count by color mode the total number of pages sent with
Scan-to-PC with the Scan application.
867x-001
B/W
867x-002
Color
8681 T:PCFAX
TXPGS
*CTL These SPs count the number of pages sent by
PC Fax. These SPs are provided for the Fax
application only, so the counts for SP8 681 and
SP8 683 are the same.
[0 to 99999999/ 0 / 1/step]
8683 F:PCFAX
TXPGS
*CTL
This counts pages sent from a PC using a PC fax application, from the PC through the copier
to the destination.
When sending the same message to more than one place using broadcasting, the pages are
only counted once. (For example, a 10-page fax is sent to location A and location B. The
counter goes up by 10, not 20.)
8691 T:TX PGS/LS *CTL These SPs count the number of pages sent
from the document server. The counter for the
application that was used to store the pages is
incremented.
[0 to 99999999/ 0 / 1/step]
8692 C:TX PGS/LS *CTL
8693 F:TX PGS/LS *CTL
8694 P:TX PGS/LS *CTL

Table of Contents

Related product manuals