Printer Service Mode
SM Appendix 3-157 D255/D256/M281/M282
1001 Bit Switch
If this is 0, Store and Skip Errored Job (SSEJ) will be automatically
disabled if an external charge device is connected. (MP 501/601 Only)
Note: We do not officially support enabling this bit switch (1). Use it at
your own risk.
bit 7 Job cancels remaining pages when the
paid-for pages have been printed on an
external charge device
Job does
not cancel
Job cancels
When setting 1 is enabled, after printing the paid-for pages on an external
charge device, the job that includes any remaining pages will be
canceled.
This setting will prevent the next user from printing the unnecessary
pages from the previous user's print job. (MP 501/601 Only)
1001 Bit Switch
011 Bit Switch B 0 1
bit 0 Show Menu List Hide Menu
List
Show Menu
List
If this is 0, the Menu List button will be removed from Printer Features. (MP
501/601 Only)
bit 1 Print job interruption Does not
allow
interruption
Allow
interruption
0 (default): Print jobs are not interrupted. If a job is promoted to the top
of the print queue, it will wait for the currently printing job to finish.
1: If a job is promoted to the top of the queue, it will interrupt the
currently printing job and start printing immediately.
bit 2 Switch for enabling or disabling Limitless
Paper Feeding for the Bypass Tray
Enabled Disabled
To Next Page
Loading...
