Printer Service Mode
SM Appendix 3-159 D255/D256/M281/M282
1001 Bit Switch
Bit 6 The tray selection setting when a paper
size or paper type mismatch occurs.
Disabled Enabled
If the tray selection setting is enabled, selecting the tray that the "Apply
Auto Paper Select" setting is configured to "Off" cannot be done when a
paper size or paper type mismatch occurs.
bit 7 DFU - -
1001 Bit Switch
012 Bit Switch C 0 1
bit 0
to 4
DFU - -
bit 5 Change the user ID type displayed on the
operation panel
Disabled Enabled
As of 15S models, the Login User Name can be displayed on the
operation panel. The user ID type displayed on the operation panel can be
changed by configuring BitSwitch #12-5 as follows:
0 (default): Login User Name
1: User ID. If this is enabled, User ID will be displayed, which is
equivalent to the behavior exhibited in 14A and earlier models.
bit 6 AirPrint Enabled Disabled
AirPrint can be disabled by changing this BitSwitch from 0 (default) to 1.
bit 7 DFU - -
1003 [Clear Setting]
1003-001 Initialize System Initializes settings in the System menu of the
user mode.
1003-003 Delete Program DFU
To Next Page
Loading...
