Ricoh M281 Series - Page 85

NFC Card Reader Type M24 (D3CP-08) (MP 501/601 Only)
SM 2-57 D255/D256/M281/M282
Installation
 When installing the FG clamp [A], use the screw provided with NFC Card Reader
Type M24.
22. Attach the hook and loop fastener [A] to the base cover [B] at the position shown
below.
23. Peel off the mount from the hook and loop fastener, and then attach the NFC card
reader [A] to the base cover [B] at the position shown below.
 Attach the NFC card reader with the USB port [A] of the NFC card reader set to face
right.